Double Glazing Lock Repairs
Quality locks on your doors and windows will help prevent burglars from getting into your home. They aren't likely breaking glass or trying to squeeze through windows.
However, some double glazing owners have had problems with their door or window lock after it's been installed. Fortunately, these issues can be fixed without having to pay for new double glazing.
Broken or damaged locks
A locksmith can fix your uPVC window lock or door lock if damaged or is not working properly. They can fix hinges, striker plates and locks for your double glazing. They can also adjust the cylinder to fix any misalignment which could cause your handle to operate correctly.
The mechanism may be locked when the key fits into the lock, but it will not turn or become difficult to insert. Dirt or grease can be trapped in the mechanism. If this is the case, then it is possible to clean the lock and then lubricate it. Use a dry lubricant like graphite or Teflon but not oil as oil can attract dirt and cause it to stick to the inside mechanism. After lubricating, insert the key into the lock and turn it. The lubricant must get into the mechanism, and the lock should spin easily.
Loose double glazing Grays within the lock mechanism are a different reason for a broken lock. They can become loose and fall out, or even break completely, preventing the lock from being able to perform as it should. The screws can be tightened with a screwdriver, but you must be cautious not to tighten them too much. This can damage the internal components.
A broken lock can be dangerous for you and your family, particularly if you have young children. They can easily unlock the door without knowing which gives them access to your house. If you're worried about this happening, then a vetted locksmith can provide rapid and effective service to re-secure your double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and damaged mechanisms on uPVC windows and doors. We can also alter the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always necessary.
Handles that are damaged or broken
A lot of double-glazed windows come with a multi-point lock as a part of the overall security package. This is a great choice for those worried about potential thieves who may try to gain access to your home. Ask your locksmith about antilift blocks. They can be put in alongside your existing locks and will ensure that your windows are securely closed.
Handle locks are usually damaged or fail. They are the first thing a criminal will use to force open your window. The good news is that this is one of the easiest parts to fix.
Modern uPVC handles and aluminum handles come with a multi-point locking mechanism known as Espagnolette, which is designed to prevent forced entry. This security upgrade is offered as an option for new uPVC windows. As an alternative upgrade, older handles made of aluminium or uPVC that are no longer in use can be upgraded to shoot bolt locking systems.
When a handle is faulty it's important to get this repaired as quickly as possible. A damaged handle could prevent the window from closing properly and permit a draft to enter. It could also be a weakness that thieves can take advantage of and put your family's possessions and your personal belongings at risk.
The process of repairing the malfunctioning mechanism begins by opening the frame of the window and removing the broken handle. The gearbox that opens the handle is then removed and the type of gear is identified, so that a replacement may be found that matches the profile of the internal window frame mechanism.
After the mechanism has been repaired, the handle may be reattached using the original screws. However, we suggest replacing them with more long screws to ensure an even more secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further corrosion. Once that's done, your window will be operational again and at less than the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows don't close properly, you may be experiencing draughts, an affliction of your home's security barrier and an increased risk of damp or water damage. Window hinges that fail or fail to function properly are a common occurrence and can be fixed easily.
If you have a uPVC window that isn't able to open or close and close, it's likely that your hinges are broken or damaged and need to be replaced. While a lot of window companies require you to purchase a new window unit in order to resolve this simple issue We're able to repair the hinges that are damaged and save you money.
Window hinges can often break due to repeated use or might be damaged by corrosion over time. If you've got a broken window hinge, it is important to take precautions to avoid further damage. This means not causing the window to close or open.
The type of hinge you are looking for will help you identify the right parts to repair it. The most commonly used types of window hinges include Maco, Mila, Roto and many other brands. Consult a professional to avoid purchasing parts that will not fit into your existing hardware. This could cause further damage.
The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be an important source of noise and could also allow water to infiltrate your windows.
To fix this issue, first make sure that the pin barrel on both sides of the hinge is aligned. If it's not tapping the headpin, use a hammer in order to create a slight bend in hinge barrel. This will help to keep the pin in the right position. Have a person hold the doors as you take out hinge screws and hinges. Replace the hinges with ones of a matching size and attach the screws using glue. Finally put the hinges in place using clamps or weights until the glue sets.
Once the hinges have been fixed, you should be able to install the door and re-attach the handle. It is a good idea to replace the screws with the same length of dowels as the screw that was originally used so that they are in line with each one.
Broken or damaged glass
uPVC Windows can be damaged over time, despite the fact that they are extremely effective in keeping cold out and keeping warmth. This can include broken or damaged glass as well as faulty locks. This issue could be extremely costly should it be not addressed. It can also affect the appearance of your home and can lead to a loss in insulation. It is crucial to repair any damage immediately.
If your glass is cracked but not shattered it is possible to fix it yourself with the proper tools and methods. Be sure that the area surrounding the broken glass is clear of debris, so that shards do not cause injury or cause a trip hazard. Then, you must remove any broken pieces and dispose of them in a safe manner. Then, place masking tape over the entire area to prevent shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to gluing it in place is recommended in the case of windows with two panes. This will ensure you have enough space to complete your project.
Use a clean, dry cloth to clean the surface of the broken glass and the frame prior to applying the glue. Follow the directions for application and curing that can differ from product to product. You may have to clamp the cracked glass with lightweight clamps designed to hold fragile materials, based on the angle.
After the adhesive has fully set, carefully place the glass into the window frame, making sure it's flush with the edges of the frame and that there aren't any gaps between the glass and the window sash. Be careful to avoid flexing the window when it's being installed, as this could weaken the seal and lead to condensation and water infiltration.
Contact a professional glazier, like O'Brien(r) for an exchange if your glass window has been completely broken. Leaving broken glass unattended can pose a safety risk for pets and children, so it's essential to act fast.